 |
Brother ScanNCut Small Barrell Pen Holder | CAUNIPHL2
Product Code : CAUNIPHL2
£16.95
Save £2.04 Was £18.99
Information for Brother ScanNCut Small Barrell Pen Holder | CAUNIPHL2
Brother ScanNCut Small Barrell Pen Holder | CAUNIPHL2 Information
Use the ScanNCut Small Barrel Pen Holder to hold your favorite thin pen for achieving extra fine drawing results.
- Small Barrell Pen Holder x 1
- Stand x 1
- Compatible pen size: Diameter 7.8 - 9.6mm
The Universal Pen Holder enhances creative flexibility when using ScanNCut machines.
Which will allow you to draw on a variety of surfaces, including paper, fabric and other mediums.
Suitable For Brother cutting machines ScanNCut:
SDX2240D, SDX2250D, SDXTL, CM300, SDX100, SDX135, SDX900.
Writing guidelines
SIMILAR PRODUCTS YOU MAY ALSO LIKE
- The Universal Pen Holder enhances creative flexibility when using ScanNCut machines.
- It accommodates most pens and writing instruments.
- Which will allow you to draw on a variety of surfaces, including paper, fabric, and other mediums
- Calligraphy Pen Set – 5 pens (Black, Black, Blue, Carmine Red, Grey)
- Require Caligraphy Starter kit (additional purchase necessary)
- Only for SDX range
- Ideal for securely and evenly fastening material to your cutting mat.
- It also excels at burnishing materials, such as adhesive craft vinyl, onto smooth surfaces.
- Dimensions: 102mm / 4 inches.
- This versatile tool allows you to effortlessly remove cutouts from your cutting mat or apply cut designs to smooth surfaces, ensuring they are firmly secured.
- It is a perfect complement to the Brother Spatula and Hook set.
- 100mm/3.9"wide.
- Set of 2
- For best results, use with the Foil Transfer Starter Kit itemCAFTKIT1, sold separately
- For use with Brother cutting machines
- Fully automatic blade—no need to adjust pressure or blade depth
- Specially made for thin fabric without backing
- For use with the ScanNCut Thin Fabric Auto Blade (blade not included)
- Size: 12 x 9.5" (305 x 241mm)
- Require embossing tool set to use line embossing
- For region embossing, activated Embossing Function on your ScanNCut is needed (extra purchase)
- Reverse it – now you can use reverse rolled, as well as forward rolled materials on your Roll Feeder II, such as heat transfer vinyl.
- In the thick of it – you can now cut materials from 0.15 mm up to 0.5 mm thick on the roll feeder II (roll feeder I range 0.21 mm – 0.35 mm).
- Easier feed for reverse rolled and more delicate materials with the included Leader Sheet.
- Compatible with ScanNCut DX range only – please check Brother Solutions Center for compatibility.
- This mat ensures precise cutting of thin fabrics when used with the Thin Auto Fabric Blade.
- It is specifically designed for thin fabrics and materials requiring a stronger adhesive mat.
- The mat measures 12 x 12 inches (305 x 305 mm) and is compatible with Brother ScanNCut DX machines.
- Includes: 2 Template Sheets, 2 Transfer Sheets, Positioning Brush, Backing Board (reusable), Pick-up Tool, 1,450 Total Hot Fix Rhinestones (various colors and sizes), Instruction Guide, and activation card for the Rhinestone Function
- For use with Brother cutting machines
- A free CanvasWorkspace account and internet connection is necessary for activating the card.
- Set includes: 3 Template Sheets 12" x 12" (305 mm x 305 mm) and 3 Transfer Sheets 12" x 12" (305 mm x 305 mm)
- For use with Rhinestone Starter Kit
- For use with Brother cutting machines
- 7 12" x 12" Transfer Sheets (305mm x 305mm)
- For use with Rhinestone Starter Kit
- For use with Brother cutting machines
- 3 stamp sheets: 6 x 8" (150 x 200mm)
- For use with Brother cutting machines
- Paper piercing tools x 2 (0.4 mm/0.8 mm each)
- Require Paper Piercing Starter kit (additional purchase necessary)
- Only for SDX range
- 2 metal sheets: 7.9 x 6.1" (200 x 155mm)
- Caution: Do not cut metal sheets on a ScanNCut machine, otherwise the blade may break or the machine may be damaged
- 3 Template sheets: 12 x 12" (305 x 305mm)
- For use with Embossing Starter Kit
- Contents: Glue pen holder, Glue pen, Pressing tool, Foil transfer sheets (100 x 200mm, 1 silver and 1 gold), Protective sheet 8.6 x 12" (220 x 305mm), Dust removal sheet with storage sheet 1.9 x 2.9" (50 x 75mm), 1 Activation card to unlock function in CanvasWorkspace
- For use with Brother cutting machines
- A free CanvasWorkspace account and internet connection is necessary for activating the card.
- 4 Foil Transfer Sheets
- 4 x 8" / 100 x 200mm per sheet
- For best results, use with the Foil Transfer Starter Kit itemCAFTKIT1, sold separately
- For use with Brother cutting machines
CUSTOMERS ALSO BOUGHT COMPLETE YOUR SELECTION
- Fully automatic blade – no need to adjust pressure or blade depth.
- This cutting blade is suitable for a wide range of fabric and paper.
- Designed for use with the ScanNCut DX Auto Blade Holder (Blade Holder not included).
- Mat cutting area 11.7 inch X 11.7 inch (297.18mm X 297.18mm).
- Ideal for felt, denim, lycra, and quilt blocks.
- Reusable high tack fabric support sheets.
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- Roll Feeder Design Collection 1
- 29 design totals
- 28 designs
- Included designs are for personal use only and may not be used for resale.
- All designs are created by Japanese designer, Pig Pong, Yoko Ganaha.
- A free Canvas Workspace account and internet connection are necessary to unlock the designs
- Included items:Paper piercing tool x 2 (0.4 mm/0.8 mm each)Paper piercing tool holder x 1Paper piercing mat x 1Activation card x 1Test Card (5” x 7”) x 1Envelope (5.2” x 7.2”) x 1Contents in activation: 30 patterns
- Only for SDX range
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- Enhanced Image tracing allows you to trace cutting data in images where the area to be cut is unclear. Making it even easier to use than the Canvas normal tracing function.
- 25 designs included
- NOTE: The Image tracing function is the same in both Premium packs 1 & 2. Only the pattern designs are different.
- For use with free CanvasWorkspace account
- This mat ensures precise cutting of thin fabrics when used with the Thin Auto Fabric Blade.
- It is specifically designed for thin fabrics and materials requiring a stronger adhesive mat.
- The mat measures 12 x 12 inches (305 x 305 mm) and is compatible with Brother ScanNCut DX machines.
- Fully automatic blade – no need to adjust pressure or blade depth.
- This cutting blade is suitable for a wide range of fabric and paper, with thicknesses ranging from 0.1 to 3 mm, depending on the material.
- Designed for use with the ScanNCut DX Auto Blade Holder (Blade Holder not included).
- Set of 2
- For best results, use with the Foil Transfer Starter Kit itemCAFTKIT1, sold separately
- For use with Brother cutting machines
- The scan mat ensures excellent scan quality.
- Scanning area: 305 mm x 305 mm (12" x 12").
- Not intended for cutting.
- Compatible with Brother ScanNCut DX SDX machines.
Brother ScanNCut Standard Tack Adhesive Mat 12 x 12 Inch | CADXMATSTD12
£19.00
Save £2.99
Was £21.99
- Cutting mat size: 12" x 12" / 305 x 305 mm.
- Compatible with Brother ScanNCut DX machines.
- Replacement blade for the Vinyl Auto Blade.
- Cuts a variety of vinyl, stencil, and heat transfer materials.
- Fully automatic blade, eliminating the need to adjust pressure or blade depth.
- Designed for use with the ScanNCut DX Vinyl Auto Blade Holder (Blade Holder not included).
- Designed to be ironed onto the back of fabric, allowing it to be used as appliqué pieces.
- One sheet measures 914 x 470 mm.
- Fully automatic blade—no need to adjust pressure or blade depth
- Specially made for thin fabric without backing
- For use with the ScanNCut Thin Fabric Auto Blade (blade not included)
Add To Basket
